Labotemp Dental Thermoforming Machine LDM 102 operates with adjustable heating from 120°C to 240°C and positive working pressure from 0.3 to 0.5 MPa, providing controlled thermoforming of dental moulding films. The machine accepts 125 mm diameter films with thicknesses from 0.8 to 4 mm and allows heating time from 2 to 120 seconds and pressing time from 2 to 60 seconds, enabling the forming cycle to be adjusted according to the material and film thickness.
Designed for dental laboratories and orthodontic applications, the LDM 102 uses far infrared heating to soften the moulding film before positive pressure forms it over the dental model. Computer chip programming, digital timing display, touch switch operation, and adjustable pressure control support a controlled forming process. The machine requires connection to an air compressor or pump as the gas source, while its automatic pressing and subsequent air cooling sequence helps complete the moulding cycle after heating.
Why Choose Labotemp Dental Thermoforming Machine LDM 102?
✓ Adjustable Heating: Set the heating temperature from 120°C to 240°C according to the moulding film being processed.
✓ Controlled Positive Pressure: Adjustable working pressure from 0.3 to 0.5 MPa provides controlled forming conditions for different moulding films.
✓ Flexible Forming Cycle: Heating time from 2 to 120 seconds and pressing time from 2 to 60 seconds can be adjusted according to material and thickness.
| No. | Specification | Value |
|---|---|---|
| Forming and Heating | ||
| 1 | Heating Temperature | 120°C to 240°C, Adjustable |
| 2 | Heating Time | 2 to 120 seconds, Adjustable |
| 3 | Pressing Time | 2 to 60 seconds, Adjustable |
| 4 | Working Pressure | 0.3 to 0.5 MPa, Adjustable |
| 5 | Applicable Film Diameter | 125 mm |
| 6 | Applicable Film Thickness | 0.8 to 4 mm |
| 7 | Heating Method | Far Infrared Heating |
| 8 | Forming Method | Positive Pressure Forming |
| Control System | ||
| 9 | Control System- | Computer Chip Programming |
| 10 | Display | Digital Display |
| 11 | Operation Interface | Touch Switch |
| 12 | Pressure Monitoring | Pressure Gauge |
| 13 | Work Cycle Control | Dedicated Work Button |
| 14 | Default Heating Temperature | 220°C |
| 15 | Default Heating Time | 25 seconds |
| 16 | Default Pressing Time | 10 seconds |
| 17 | Default Working Pressure | 0.4 MPa |
| Electrical Requirements | ||
| 18 | Power Supply | 220V or 110V ±10%, 50Hz |
| 19 | Power Consumption | Less than 850 W |
| 20 | External Air Source | Air Compressor or Pump Required |
| Physical Details | ||
| 21 | Net Weight | 20 kg |
| 22 | Gross Weight | 24 kg |
Dental Laboratories: Suitable for thermoforming thermoplastic sheets over dental models to produce custom dental appliances.
Orthodontic Laboratories: Suitable for producing orthodontic appliances such as braces and retainers through positive pressure forming.
Mouthguard Production: Suitable for forming mouthguards that adapt closely to the dental model.
Dental Whitening Applications: Suitable for dental thermoforming applications associated with teeth treatment and whitening.
Clear Aligner Production: Positive pressure thermoforming is used to form clear aligners and retainers over dental models.
Dental Appliance Fabrication: Suitable for other custom thermoplastic dental appliances requiring controlled heating and positive pressure forming.
